Download Stock Rom colors x50

DOWNLOAD FILE via Mediafire HERE

DOWNLOAD FILE via Googledrive HERE

dene's tool tip challenge today is tobuild a picture frame and a jig to helphim do it. so i've got to build the frame and do a jig within an hour. within an hour, as a matter of fact t he offcuts from the frame help you buildthe jig. ok so here are the materials you will needand the usual array of tools. let's make this frame. using your adjustable scribe score a line 3mm from the edge of the maranti to mark the position of the frame edge. then, using 40mm nails glue and nail the frame edge. don't drive the nails all the way in because we'll remove them once the glue is dry.

it's really important to get the bead lined up exactly along the scribe mark because when you do your cutsif it's not, when the joins come together. it doesn't line up and it looks silly. wipe off the excess glue. then carefully set the saw stop to cut the long pieces of the frame. it's important, when you're measuringto set the saw stop, not to push the blade either way or your 450mm measurementwill be out. keep it dead straight. once the glue's dry use a block of woodto protect the edge of the frame and remove the nails.

your mitre saw, when you skew it to 45 degrees actually clicks in to place if it's just out your cut won't work the other one is when your using a mitresaw push and pull gently. don't hold it too tight because you'll skew the saw. then you mitre cut will have a new anglein it so they won't fit together. then, set the mitre saw at 45 degrees andcut the first end, or waste piece. in making the picture frame the innerbead must always face toward you when you make the cut. in doing this you'll reverse the saw between cuts and end up with 3

triangular bits of waste than make up thejig for your frame. ok, so this going to form the base of yourjig. the 3 pieces of waste are pre-drilled.then we check the base for squareness. and using the frame as a guide we mount the 3 triangular pieces which will hold the frame in place while we drill and glue it. using a 5mm dowel bit we drill the corners of the frame at 45 degrees. we put the dowel in place and hold themwith a strong elastic band. once this is done the elastic bands can bedrawn across the frame to hold it in place while the glue dries.

once this is dry the elastic bands can be removed and we trim back the dowells. now all we have to do is cut the acrylicsheet. we then mark and cut the acrylic sheetleaving the protective coating in place. and it snaps fairly easily. your simple picture frame and jig is done.